3.5 inch SPI TFT LCD Module with ILI9488 480x320 Resolution
Options:
2.2 inch SPI LCD Module without touch;2.2 inch SPI Module display with RTP
2.4 inch SPI LCD Module without touch;2.4 inch SPI Module display with RTP
2.8 inch SPI LCD Module without touch;2.8 inch SPI Module display with RTP
3.2 inch SPI LCD Module without touch;3.2 inch SPI Module display with RTP
3.5 inch SPI LCD Module without touch;3.5 inch SPI Module display with RTP
4.0 inch SPI LCD Module without touch;4.0 inch SPI Module display with RTP
3.5-inch TFT LCD with SPI Interface Specifications:
◦ Display Color: RGB 65K colour
◦ Screen Size: 3.5(inch)
◦ Type: TFT
◦ Driver IC: ILI9488
◦ Resolution: 480*320 (Pixel)
◦ Module Interface: 4-wire SPI interface
◦ Active Area (AA area): 48.96x73.44(mm)
◦ Module PCB Size: 56.34x98(mm)
◦ Operating Temperature: -20℃~60℃
◦ Storage Temperature: -30℃~70℃
◦ VCC power voltage: 3.3V~5V
◦ Logic IO port voltage: 3.3V(TTL)
◦ Power Consumption: TBD
3.5 inch SPIDisplay Description
- 3.5-inch color screen,support 65K color display,display rich colors
- 480X320 resolution, optional touch function
- Using the SPI serial bus, it only takes a few IOs to illuminate the display
- Easy to expand the experiment with SD card slot
- Provide a rich sample program
- Military-grade process standards, long-term stable work
- Provide underlying driver technical support
3.5 SPI TFT Module Interface Definition
| Number | Pin Label | Description |
| 1 | VCC | 5V/3.3V power input |
| 2 | GND | Ground |
| 3 | CS | LCD chip select signal, low level enable |
| 4 | RESET | LCD reset signal, low level reset |
| 5 | DC/RS | high level: register, low level: data |
| 6 | SDI(MOSI) | SPI bus write data signal |
| 7 | SCK | SPI bus clock signal |
| 8 | LED | if not controlled, connect 3.3V always bright |
| 9 | SDO(MISO) | SPI bus read data signal, if you do not need to the read function, you can not connect it |
| (The following is the touch screen signal line wiring, if you do not need to touch function or the module itself does not have touch function, you can not connect them) |
| 10 | T_CLK | Touch SPI bus clock signal |
| 11 | T_CS | Touch screen chip select signal, low level enable |
| 12 | T_DIN | Touch SPI bus input |
| 13 | T_DO | Touch SPI bus output |
| 14 | T_IRQ | Touch screen interrupt signal, low level when touch is detected |
|
|
3.5 inch SPI TFT LCD Module with ILI9488 480x320 Resolution Images
|
